Filter
Top Products
140 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To use Specified Group Pickup:
Hardware Requirements
•N/A
Considerations
• Extension Group Pickup - 12 / CCU - maximum 72 group / 6 CCU configuration
• The Call Pickup Group assignments determine the order calls are picked up (i.e. if two calls are
ringing in the call pickup group, the call ringing the first member will be picked up first).
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialling the number of
the ringing extension.
Operation
To use Extension Direct Pickup:
Hardware Requirements
•N/A
Considerations
•N/A
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Specified Group Pickup code (default = 703 [UK/
HK] or 703# [Taiwan, Malaysia, Indonesia]).
3. Enter the number of the call pickup group (01-72) where the
call is ringing.
Extension number or outside phone
number displays
4. Complete the call and replace the handset or press the ON/
OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Extension Direct Call Pickup code (default = 704
[UK/HK] or 704# [Taiwan, Malaysia, Indonesia]).
3. Dial the number of the ringing extension. Extension number or outside phone
number displays
4. Complete the call and replace the handset or press the ON/
OFF key.