Filter
Top Products
Section 700 - Operation Chapter 7. SLT Features
ICX-50-700 ICX (International) issued June 2000 291
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Onhook Transfer at Ringback)
• FF1-0-03: Extension COS (Onhook Transfer at Talk)
• FF1-0-03: Extension COS (Onhook Transfer at Camp-on)
Considerations
• On-Hook Transfer must be enabled for the transferring party’s Extension Class of Service
(COS).
• If the call is not answered by the third party before the Transfer Recall Timer expires, the call
will recall to the transferring extension.
• If a Transfer Recall is not answered before the Recall Duration Timer expires, the call will revert
to the Attendant group.
• If the called party does not exist, the call recalls to the transferring extension.
• You cannot transfer a call to an extension that has Do-Not-Disturb (DND) activated.
• You can transfer a call to an extension that has Call Forwarding activated. The transferred call
will follow the call forwarding path of the extension it is transferred to. For example, if extension
221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to
extension 225.
• Calls can be transferred from paging using supervised transfer.
Camp-On (Call Waiting)
Description
If you dial a busy extension, you can camp onto that extension and send a Call Waiting signal to the
called party. The called party then needs only to replace the handset and pick it up again to be
Action Result
1. While on a call, hookflash to place the call on hold. Intercom dial tone
2. Dial the extension number to which the call is to be trans-
ferred.
3. If your extension does not have Auto Camp-On activated,
enter the Camp-On (Call Waiting) code (default = 2 [UK/
HK] or 2# [Taiwan, Malaysia, Indonesia]).
Camp-on tone heard at called extension
4. Complete the transfer by replacing the handset.