xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
117
To add the mirroring ports:
DGS–3426:5# config mirror port 1:1 add source ports 1:2–1:7 both
Command: config mirror port 1:1 add source ports 1:2–1:7 both
Success.
DGS–3426:5#
Example usage:
To delete the mirroring ports:
DGS–3426:5#config mirror port 1:1 delete source ports 1:2–1:4 both
Command: config mirror port 1:1 delete source ports 1:2–1:4 both
Success.
DGS–3426:5#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description This command, combined with the disable mirror command below, allows users to enter
a port mirroring configuration into the Switch, and then turn the port mirroring on and off
without having to modify the port mirroring configuration.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DGS–3426:5#enable mirror
Command: enable mirror
Success.
DGS–3426:5#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description This command, combined with the enable mirror command above, allows users to enter
a port mirroring configuration into the Switch, and then turn the port mirroring on and off
without having to modify the port mirroring configuration.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable mirroring configurations:
