xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
197
To display RADIUS settings on the Switch:
DGS–3426:5#show radius
Command: show radius
Index IP Address Auth–Port Acct–Port Timeout Retransmit Key
(secs)
––– ––––––––––––––– ––––––––– ––––––––– ––––––– --–––––––– -------------
1 10.1.1.1 1812 1813 5 2 switch
1 20.1.1.1 1812 1813 4 2 swkey
1 30.1.1.1 1812 1813 5 3 dgs3426
Total Entries : 3
DGS–3426:5#
create 802.1x user
Purpose Used to create a new 802.1X user.
Syntax
create 802.1x user <username 15>
Description This command is used to create new 802.1X users.
Parameters
<username 15> − A username of up to 15 alphanumeric characters in length.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create an 802.1X user:
DGS–3426:5#create 802.1x user RG
Command: create 802.1x user RG
Enter a case–sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS–3426:5#
show 802.1x user
Purpose Used to display the 802.1X user accounts on the Switch.
Syntax
show 802.1x user
Description This command is used to display the 802.1X Port–based or MAC–based Network Access
control local users currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
