xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
164
22
IGMP SNOOPING COMMANDS
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp_snooping [ vlan <vlan_name 32> |all] { host_timeout <sec 1-16711450> | router_timeout
<sec 1-16711450> | leave_timer <sec 1-16711450> | state [enable|disable]
|fast_leave [enable|disable] | report_suppression [enable | disable]} (1)
config igmp_snooping querier [ vlan <vlan_name 32> |all] { query_interval <sec 1-65535> | max_respons
e_time <sec 1-25> | robustness_variable <value 1-255> |
last_member_query_interval <sec 1-25> | state [enable|disable] |version <value 1-
3>} (1)
create igmp_snooping
static_group
[ vlan <vlan_name 32> | vlanid <vidlist> ] <ipaddr>
config igmp_snooping
static_group
[ vlan <vlan_name 32> | vlanid <vidlist> ] <ipaddr> [ add | delete] <portlist>
delete igmp_snooping
static_group
[vlan <vlan_name 32> | vlanid <vidlist> ] <ipaddr>
show igmp_snooping
static_group
{[vlan <vlan_name 32>| vlanid <vidlist> ] < ipaddr >}
config router_ports <vlan_name 32> [add | delete] <portlist>
config router_ports_forbidden
< vlan_name 32> [add | delete] <portlist>
enable igmp_snooping {forward_mcrouter_only}
show igmp_snooping {vlan <vlan_name 32>}
disable igmp_snooping {forward_mcrouter_only}
show igmp snooping group vlan <vlan_name 32>
show router_ports {vlan <vlan_name 32>} {[static | dynamic | forbidden]}
Each command is listed, in detail, in the following sections.
