xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
321
enable jwac forcible_logout
Purpose Used to enable the JWAC forcible logout function.
Syntax
enable jwac forcible_logout
Description When forcible logout is enabled, a PING packet from an authenticated host to the JWAC
Switch with TTL=1 will be regarded as a logout request, and the host will be moved back
to the unauthenticated state.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable JWAC forcible logout on the Switch:
DGS–3426:5# enable jwac forcible_logout
Command: enable jwac forcible_logout
Success.
DGS–3426:5#
disable jwac forcible_logout
Purpose Used to disable the JWAC forcible logout function.
Syntax
disable jwac forcible_logout
Description This command is used to disable the JWAC forcible logout function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable JWAC forcible logout on the Switch:
DGS–3426:5# disable jwac forcible_logout
Command: disable jwac forcible_logout
Success.
DGS–3426:5#
enable jwac udp_filtering
Purpose Used to enable the JWAC UDP filtering function.
Syntax
enable jwac udp_filtering
Description When UDP filtering is enabled, all UDP and ICMP packets except DHCP and DNS
packets from an unauthenticated hosts will be dropped
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the JWAC UDP filtering function:
