xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
37
disable snmp
Purpose Used to disable SNMP on the Switch.
Syntax
disable snmp
Description This command is used to disable the Simple Network Management Protocol (SNMP) on
the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable SNMP:
DGS–3426:5#disable snmp
Command: disable snmp
Success.
DGS–3426:5#
enable snmp linkchange_traps
Purpose Used to enable SNMP linkchange traps on the Switch.
Syntax
enable snmp linkchange_traps
Description This command is used to enable and disable SNMP linkchange traps on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable SNMP linkchange traps:
DGS–3426:5#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS–3426:5#
disable snmp linkchange_traps
Purpose Used to disable SNMP linkchange traps on the Switch.
Syntax
disable snmp linkchange_traps
Description This command is used to disable SNMP linkchange traps on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable SNMP linkchange traps:
DGS-3426:5#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DGS–3426:5#
