xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
383
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status Disabled
Power Via MDI Disabled
Link Aggregation Disabled
Maximum Frame Size Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show lldp local_ports
Purpose Used to display the per-port information currently available for populating outbound LLDP
advertisements.
Syntax
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Description This command is used to display the per-port information currently available for
populating outbound LLDP advertisements.
Parameters <portlist> – Use this parameter to define ports to be configured.
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
Restrictions None.
Usage Example:
To display outbound LLDP advertisements for port 1-2:
DGS-3426:5#show lldp local_ports 1-2
Command: show lldp local_ports 1-2
Port ID : 1
-----------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
Port ID : 2
-----------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
