xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
406
delete dhcp excluded_address
Purpose Used to delete IP addresses that have been configured as excluded from the DHCP
Server pool of addresses.
Syntax
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> |
all]
Description This command is used to delete a previously set IP address, or a range of IP addresses
that are NOT to be included in the range of IP addresses that the Switch will allot to
clients requesting DHCP service.
Parameters
begin_address <ipaddr> − Enter the beginning IP address of the range of IP addresses to
be deleted from the excluded IP address list, from the DHCP pool.
end_address <ipaddr> − Enter the ending IP address of the range of IP addresses to be
deleted from the excluded IP address list, from the DHCP pool.
all – Enter this command to delete all excluded IP addresses, from the DHCP pool.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete excluded IP addresses:
DGS-3426:5#delete dhcp excluded
address begin
address 10.10.10.1 end
address
10.10.10.10
Command: delete dhcp excluded
address begin
address 10.10.10.1 end
address
10.10.10.10
Success.
DGS-3426:5#
show dhcp excluded_address
Purpose Used to display the excluded IP addresses of the DHCP server function.
Syntax
show dhcp excluded_address
Description This command is used to display the excluded IP addresses of the DHCP server function.
Parameters None.
Restrictions None.
Example usage:
To display the excluded IP addresses:
DGS-3426:5#show dhcp excluded_address
Command:show dhcp excluded_address
Index Begin Address End Address
------- ----------------- -------------------------
1 192.168.0.1 192.168.0.100
2 10.10.10.10 10.10.10.10
Total Entries : 2
DGS-3426:5#
