xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
381
config lldp forward_message
Purpose Used to configure the forwarding of LLDPDU packets when LLDP is disabled.
Syntax
config lldp forward_message [enable | disable]
Description When LLDP is disabled and LLDP forward_message is enabled, the received LLDPDU
packets will be forwarded. The default state is disabled.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Usage Example:
To configure LLDP forward_message:
DGS–3426:5#config lldp forward_message enable
Command: config lldp forward_message enable
Success.
DGS–3426:5#
show lldp
Purpose This command displays the switch’s general LLDP configuration status.
Syntax
show lldp
Description This command is used to display the Switch’s general LLDP configuration status.
Parameters None.
Restrictions None.
Usage Example:
To display the LLDP system level configuration status:
DGS–3426:5#show lldp
Command: show lldp
LLDP System Information
Chassis ID Subtype : MAC Address
Chassis ID : 00-80-C2-11-22-00
System Name :
System Description : Fast Ethernet Switch
System Capabilities : Repeater, Bridge
LLDP Configurations
LLDP Status : Disabled
LLDP Forward Status : Disabled
Message Tx Interval : 30
Message Tx Hold Multiplier : 4
ReInit Delay : 2
Tx Delay : 2
Notification Interval : 5
DGS–3426:5#
