xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
config authen_login
Parameters the TACACS protocol from the remote TACACS server hosts of the TACACS
server group list.
xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from the remote XTACACS server hosts of the
XTACACS server group list.
tacacs+ – Adding this parameter will require the user to be authenticated using
the TACACS+ protocol from the remote TACACS+ server hosts of the
TACACS+ server group list.
radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
server_group <string 15> – Adding this parameter will require the user to be
authenticated using a user–defined server group previously configured on the
Switch.
local – Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
none – Adding this parameter will require no authentication to access the
Switch.
method_list_name – Enter a previously implemented method list name defined by the
user. The user may add one, or a combination of up to four of the following authentication
methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated using
the TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using
the TACACS+ protocol from a remote TACACS+ server.
radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
server_group <string 15> – Adding this parameter will require the user to be
authenticated using a user–defined server group previously configured on the
Switch.
local – Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
none – Adding this parameter will require no authentication to access the
Switch.
NOTE:
Entering none or local as an authentication protocol will override
any other authentication that follows it on a method list or on the default
method list.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Tiberius” with authentication methods tacacs, xtacacs and local, in that order.
DGS–3426:5#config authen_login method_list_name Tiberius method tacacs xtacacs
local
Command: config authen_login method_list_name Tiberius method tacacs xtacacs
local
Success.
DGS–3426:5#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
266
