xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
384
show lldp remote_ports
Purpose Used to display the information learned from the neighbor.
Syntax
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Description This command is used to display the information learned from the neighbor parameters.
Due to a memory limitation, only 32 VLAN Name entries and 10 Management Address
entries can be received.
Parameters <portlist> – Use this parameter to define ports to be configured.
mode – Choose from three options:
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
Restrictions None.
Example usage:
To display remote table in brief mode:
DGS-3426:5#show lldp remote_ports 1-2 mode brief
Command: show lldp remote_ports 1-2 mode brief
Port ID: 1
---------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-0-2-03-04-01
Port ID Subtype : Local
Port ID : 1/3
Port Description : RMON Port 1 on Unit 3
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show lldp statistics
Purpose Used to display the system LLDP statistics information.
Syntax
show lldp statistics
Description This command is used to display an overview of neighbor detection activity on the
Switch.
Parameters None.
Restrictions None.
Example usage:
To display global statistics information:
DGS-3426:5#show lldp statistics
Command: show lldp statistics
Last Change Time : 1705
Number of Table Insert : 0
Number of Table Delete : 0
Number of Table Drop : 0
Number of Table Ageout : 0
DGS-3426:5#
