xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
391
DGS-3426:5#config sflow counter_poller ports 1 interval 50
Command: create sflow counter_poller ports 1 interval 50
Success.
DGS-3426:5#
delete sflow counter_poller ports
Purpose Used to delete the counter poller for the sFlow function of the switch.
Syntax
delete sflow counter_poller ports [<portlist> | all]
Description This command is used to delete the Switch’s counter poller.
Parameters
<portlist> − Use this parameter to delete the ports that will be mined for sFlow
information.
all – Use this parameter to delete all ports to be mined for sFlow information.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the sFlow counter poller settings:
DGS-3426:5#delete sflow counter_poller ports all
Command:delete sflow counter_poller ports all
Success.
DGS-3426:5#
show sflow counter_poller
Purpose Used to display the counter poller for the sFlow function of the switch.
Syntax
show sflow counter_poller
Description This command is used to display the Switch’s counter poller.
Parameters None.
Restrictions None.
Example usage:
To show the sFlow counter poller settings:
DGS-3426:5#show sflow counter_poller
Command:show sflow counter_poller
Port Analyzer Server ID Polling Interval (secs)
-------- --------------------- -----------------------
1 1 20
Total Entries : 1
DGS-3426:5#
