xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
434
enable authorization network
Purpose To enable authorization on the Switch.
Syntax
enable authorization network
Description This command is used to enable authorization of the network.
When the authorization for network is enabled, whether the authorized data assigned by
the RADUIS server will be accepted will depend on the individual module’s setting.
Authorization for the network is enabled by default.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the authorization network:
DGS-3426:5#enable authorization network
Command: enable authorization network
Success.
DGS-3426:5#
disable authorization network
Purpose To disable authorization on the Switch.
Syntax
disable authorization network
Description This command is used to disable the authorization of the network.
When the authorization for network is disabled, the authorization data assigned by the
RADUIS server will not be accepted and take effect.
Authorization for the network is enabled by default.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the authorization network:
DGS-3426:5#disable authorization network
Command: disable authorization network
Success.
DGS-3426:5#
show authorization
Purpose This command is used to show authorization status.
Syntax
show authorization
Description This command is used to display the current authorization status on the Switch.
Parameters None.
Restrictions None.
