xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
146
disable address_binding trap_log
Purpose Used to disable the trap/log for the IP–MAC-Port Binding function.
Syntax
disable address_binding trap_log
Description This command, along with the enable address_binding trap_log, will enable and
disable the sending of trap/log messages for IMPB. When disabled, the Switch will not
send trap/log messages.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the sending of IP–MAC-Port Binding trap/log messages on the Switch:
DGS–3426:5#disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DGS–3426:5#
debug address_binding
Purpose Used to configure the address binding debugging feature on the Switch.
Syntax
debug address_binding [event | dhcp | all ]
Description This command is used to configure the IPMB debugging feature. The debugging feature
is disabled by default.
Parameters event – The Switch will print out the debug messages when an IMPB module receives
ARP/IP packets.
dhcp –The Switch will print out the debug messages when the IMPB module receives the
DHCP packets.
all –The Switch will print out all debugging messages.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable debugging of IMP IP packets:
DGS–3426:5#debug address_binding event
Command: debug address_binding event
Success.
DGS–3426:5#
no debug address_binding
Purpose Used to disable IMPB debugging on the Switch.
Syntax
no debug address_binding
Description This command is used to disable IMPB debugging on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
