xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
352
DGS–3426:5#enable gvrp
Command: enable gvrp
Success.
DGS–3426:5#
disable gvrp
Purpose Used to disable the Generic VLAN Registration Protocol (GVRP).
Syntax
disable gvrp
Description This command is used to disable the Generic VLAN Registration Protocol (GVRP).
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable Generic VLAN Registration Protocol:
DGS–3426:5# disable gvrp
Command: disable gvrp
Success.
DGS–3426:5#
show vlan
Purpose Used to show VLAN information, including parameter settings and operational values.
Syntax
show vlan { [<vlan_name 32> | vlanid <vlanid_list> | ports <portlist> ]}
Description This command is used to display summary information about each VLAN, which includes:
VLANID
VLAN Name
Tagged / untagged / Forbidden/– status for each port
Member / Non–member/– status for each port
Parameters vlan_name – The name of the VLAN to be displayed.
vlanid – The ID of the VLAN to be displayed.
portlist – The list of ports for which the VLAN information will be displayed.
Restrictions None.
Example usage:
To display VLAN information:
