xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
133
DGS–3426:5#config igmp_snooping multicast_vlan_group test add 225.1.1.1–
225.1.1.10,225.1.1.20
Command: config igmp_snooping multicast_vlan_group test add 225.1.1.1–
225.1.1.10,225.1.1.20
Success.
DGS–3426:5#
show igmp_snooping multicast_vlan
Purpose Used to display an ISM VLAN on the Switch.
Syntax
show igmp_snooping multicast_vlan {<vlan_name 32>}
Description This command is used to display the settings of a multicast VLAN on the Switch.
Parameters <vlan_name 32> – Specifies the ISM VLAN name, max length is 32
Restrictions None.
Example usage:
To display an ISM VLAN:
DGS–3426:5# show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
VLAN Name : test
VID : 2
Member (Untagged) Ports :1–8
Tagged Member Ports : 10
Source Ports : 9
Status : Enabled
Replace Source IP : 192.18.2.1
Total Entries: 1
show igmp_snooping multicast_vlan_group
Purpose Used to display the ISM VLAN groups on the Switch.
Syntax
show igmp_snooping multicast_vlan_group <vlan_name 32>
Description This command is used to display the settings of a multicast VLAN group on the Switch.
Parameters <vlan_name 32> – Specifies the ISM VLAN name. The maximum length is 32.
Restrictions None.
Example usage:
To display an ISM VLAN Group:
DGS–3426:5#show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name VLAN ID From To
––––––––––––––––– ––––––– –––––––––––– –––––––––––
test 2
DGS–3426:5#
