xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
331
DGS–3426:5# delete jwac user 112233
Command: delete jwac user 112233
Success.
DGS–3426:5#
show jwac user
Purpose Used to display a JWAC user in the local DB.
Syntax
show jwac user
Description This command is used to display JWAC users in the local DB.
Parameters None.
Restrictions None.
Example usage:
To display a JWAC user:
DGS-3426:5#show jwac user
Command: show jwac user
Current Accounts:
Username Password VID
–––––––––––––– –––––––––––––– ------
1 1 1
Total Entries : 1
DGS-3426:5#
clear jwac auth_state
Purpose Used to delete host on JWAC enabled ports
Syntax
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating |
blocked} | mac_addr <macaddr>]
Description This command is used to delete JWAC host.
Parameters ports – To specify the port range to delete host on them
authenticated – To specify the state of host to delete
authenticating – To specify the state of host to delete
blocked – To specify the state of host to delete
<macaddr> – To delete a specified host with this MAC
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a JWAC host:
