xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
336
config jwac authorization network
Purpose Used to enable or disable the accepting of an authorized configuration.
Syntax
config jwac authorization network {radius [enable| disable]| local[enable| disable]}
(1)
Description This command is used by administrators to configure an authorization network for JWAC.
When the authorization is enabled for JWAC’s RADIUS, the authorized data assigned by
the RADUIS server will be accepted if the global authorization network is enabled.
When the authorization is enabled for JWAC’s local, the authorized data assigned by the
local database will be accepted.
Parameters radius – If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled.The default state is enabled.
local – If specified to enable, the authorized data assigned by the local database will be
accepted if the global authorization network is enabled.The default state is enabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the accepting of an authorized configuration:
DGS-3426:5#config jwac authorization network radius enable
Command: config jwac authorization network radius enable
Success.
DGS-3426:5#
config jwac authenticate_page
Purpose Used to choose the authenticate page.
Syntax
config jwac authenticate_page [ japanese| english ]
Description This command is used by administrators to decide which authenticate page to be used.
Parameters japanese – Choose the Japanese page
english – Choose the English page. The default page is English.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To choose the Japanese authenticate page:
DGS-3426:5#config jwac authenticate_page japanese
Command: config jwac authenticate_page japanese
Success.
DGS-3426:5#
