xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
362
show mac_based_access_control
Purpose Used to display the MAC-based access control global and port settings.
Syntax
show mac_based_access_control {ports {<portlist> }}
Description This command is used to display the MAC-based access control global and port settings.
Parameters ports – Display the MAC-based access control port state.
Restrictions None.
Example usage:
To display MAC-based access control settings:
DGS-3426:5#show mac_based_access_control ports 1-7
Command: show mac_based_access_control ports 1:1-1:7
Port State Aging Time Block Time Auth Mode Max User
(mins) (secs)
----- -------- ---------- --------- ---------- --------
1:1 Disabled 1440 300 Host_based 128
1:2 Disabled 1440 300 Host_based 128
1:3 Disabled 1440 300 Host_based 128
1:4 Disabled 1440 300 Host_based 128
1:5 Enabled 1440 300 Host_based 128
1:6 Enabled 1440 300 Host_based 128
1:7 Enabled 1440 300 Host_based 128
DGS-3426:5#
To display MAC-based access control:
DGS-3426:5#show mac_based_access_control
Command: show mac_based_access_control
MAC Based Access Control
------------------------------------
State : Disabled
Method : RADIUS
Authentication Failover: Disabled
Password : default
Max User : No Limit
Guest VLAN : default
Guest VLAN Member Ports: 1-8
RADIUS Authorization : Enabled
Local Authorization : Enabled
DGS-3426:5#
