xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
405
DGS-3426:5#disable dhcp_server
Command: disable dhcp_server
Success.
DGS-3426:5#
show dhcp_server
Purpose Used to display the DHCP server settings.
Syntax
show dhcp_server
Description This command is used to display the DHCP server settings for its Global state, Ping
packet count and Ping timeout.
Parameters None.
Restrictions None.
Example usage:
To display the DHCP server settings:
DGS-3426:5#show dhcp_server
Command:show dhcp_server
DHCP Server Global State: Disable
Ping Packet Number : 2
Ping Timeout : 500 ms
DGS-3426:5#
create dhcp excluded_address begin_address
Purpose Used to configure IP addresses that will be excluded from the DHCP Server pool of
addresses.
Syntax
create dhcp excluded_address begin_address [<ipaddr> end_address <ipaddr>
Description This command is used to set an IP address, or a range of IP addresses that are NOT to
be included in the range of IP addresses that the Switch will allot to clients requesting
DHCP service.
Parameters
begin_address <ipaddr> − Enter the beginning IP address of the range of IP addresses to
be excluded from the DHCP pool.
end_address <ipaddr> − Enter the ending IP address of the range of IP addresses to be
excluded from the DHCP pool.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure IP addresses that will be excluded :
DGS-3426:5#create dhcp excluded
address begin
address 10.10.10.1 end
address
10.10.10.10
Command: create dhcp excluded
address begin
address 10.10.10.1 end
address
10.10.10.10
Success.
DGS-3426:5#
