xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
433
show authentication guest_vlan
Purpose This command is used to display the guest VLAN settings.
Syntax
show authentication guest_vlan
Description This command is used to show the information of the guest VLAN.
Parameters None.
Restrictions None.
Example usage:
To display the guest VLAN settings on the Switch:
DGS-3426:5#show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID :1
Guest VLAN Member Ports:4
Total Entries: 1
DGS-3426:5#
show authentication ports
Purpose This command is used to display authentication settings on port(s).
Syntax
show authentication ports {<portlist>}
Description This command is used to display the authentication method and authorization mode on
ports.
Parameters portlist – Displays compound authentication on specific port(s).
Restrictions None.
Example usage:
To display authentication settings for all ports:
DGS-3426:5#show authentication ports
Command: show authentication ports
Port Methods Authorized Mode
---- --------------- -----------------
1:1 Any Host_based
1:2 Any Host_based
1:3 Any Host_based
1:4 Any Host_based
1:5 Any Host_based
1:6 Any Host_based
1:7 Any Host_based
1:8 Any Host_based
1:9 Any Host_based
1:10 Any Host_based
1:11 Any Host_based
1:12 Any Host_based
1:13 Any Host_based
1:14 Any Host_based
1:15 Any Host_based
1:16 Any Host_based
1:17 Any Host_based
1:18 Any Host_based
1:19 Any Host_based
1:20 Any Host_based
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
