xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
13
show module_info
Purpose Used to display information about installed modules.
Syntax
show module_info
Description Displays information about optional modules that may be installed on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display information about installed modules:
DGS–3426:5# show module_info
Command: show module_info
BOX ID Module Name Rev. Serial Description
ID No.
––– –– ––––––––––––– –––– –––––––––– –––––––––––––––––––––––––
1 1 DEM–410X A0 PA5A5A5A5 1 Port XFP Module
1 2 DEM–410X A0 PA5A5A5A5 1 Port XFP Module
DGS–3426:5#
show device_status
Purpose Used to display current status of fans and power or power supplies on the system.
Syntax
show device_status
Description This command displays the current status of power(s) and fan(s) on the system. There is
a status display for all the fans on the Switch. If all fans are working normally, there will a
corresponding “OK” in the Fan display field. If any fan fails there will be a corresponding
fail message in the Fan display field, such as “1,3 Fail”.
Parameters None.
Restrictions None.
Example usage:
To display status of fans and power supply:
DGS-3426P:5#show device_status
Command: show device_status
Unit 1:
Internal Power: Active
External Power: Fail
Left Fan : OK
Right Fan : OK
Back Fan : OK
CPU Fan : ---
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
