A SERVICE OF

logo

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
407
show dhcp pool
Purpose Used to show the DHCP pool information.
Syntax
show dhcp pool {<pool_name 12>}
Description This command is used to display the DHCP pool information. Entering the command
without the pool name will display all DHCP pool information on the switch.
Parameters <pool_name 12> Enter the name of the DHCP pool for which to view DHCP pool
information.
Restrictions None.
Example usage:
To display the DHCP pool information:
DGS-3426:5#show dhcp pool Floor2
Command: show dhcp pool Floor2
Pool Name :Floor2
Network Address :10.0.0.0/8
Domain Name :
DNS Server Address :0.0.0.0
NetBIOS Name Server :0.0.0.0
NetBIOS Node Type :Broadcast
Default Router :0.0.0.0
Pool Lease :1 Days, 0 Hours, 0 Minutes
Boot File :
Next Server :0.0.0.0
Total Pool Entry: 1
DGS-3426:5#