xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
443
show wac
Purpose Used to display the Web authentication global settings.
Syntax
show wac
Description This command is used to display the WAC global settings.
Parameters None.
Restrictions None.
Example usage:
To display WAC:
DGS-3426:5#show wac
Command: show wac
Web-Base Access Control
--------------------------------
State : Disabled
Method : Local
Authentication Failover : Disabled
Redirect Path :
Virtual IP : 0.0.0.0
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Disabled
DGS-3426:5#
show wac ports
Purpose Used to display the Web Authentication port level settings.
Syntax
show wac ports {<portlist>}
Description This command is used to display the port level setting.
Parameters ports – A range of member ports to show the status.
Restrictions None.
Example usage:
To show WAC ports:
DGS-3426:5#show wac ports 1-3
Command: show wac ports 1:1-1:3
Port State Aging Time Idle Time Block Time
(Minutes) (Minutes) (Seconds)
----- -------- ------------- ------------- -----------
1:1 Disabled 1440 Infinite 60
1:2 Disabled 1440 Infinite 60
1:3 Disabled 1440 Infinite 60
DGS-3426:5#
