xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
132
DGS–3426:5#config vlan default delete 10–20
Command: config vlan default delete 10–20
Success.
DGS–3426:5#create vlan v10
Command: create vlan v10
Success.
DES–3426:4#create vlan v20
Command: create vlan v20
Success.
DGS–3426:5#config vlan v10 add untagged 10
Command: config vlan v10 add untagged 10
Success.
DGS–3426:5#config vlan v20 add untagged 20
Command: config vlan v20 add untagged 20
Success.
DGS–3426:5# config igmp
snooping multicast
vlan test member
port 10,20
source_port 1 state enable
Command: config igmp
snooping multicast
vlan test member
port 10,20 source
port
1 state enable
Success.
DGS–3426:5#
config igmp_snooping multicast_vlan_group
Purpose Used to configure multicast group in this ISM VLAN on the switch
Syntax
config igmp_snooping multicast_vlan_group <vlan_name 32> [[add | delete]
<mcast_address_list> | delete_all]
Description This command is used to configure the multicast group which will be learned with the
specific multicast VLAN.
Parameters <vlan_name 32> – Specifies the ISM VLAN name, max length is 32
add|delete – Specifies the action of configured multicast group of this ISM VLAN
add – add multicast group to this ISM VLAN
delete – delete multicast group from this ISM VLAN
mcast_address_list – Specifies the multiast groups being configure in this command
delete_all – Clear all the multicast groups in the ISM VLAN
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure multicast group to an ISM VLAN:
