xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
382
show lldp mgt_addr
Purpose Used to display the LLDP management address information.
Syntax
show lldp mgt_addr {[ipv4 <ipaddr> | ipv6 <ipv6addr>]}
Description This command is used to displays the LLDP management address information.
Parameters ipv4 – The IP address of IPv4.
Ipv6 – The IP address of IPv6.
Restrictions None.
Example usage:
To display management address information for port 1:
DGS–3426:5#show lldp mgt_addr ipv4 192.168.254.10
Command: show lldp mgt_addr ipv4 192.168.254.10
Address 1
--------------------------------------------------
Subtype : IPv4
Address : 192.168.254.10
IF type : Unknown
OID : 1.3.6.1.4.1.171.10.36.1.11
Advertising Ports : 1-5,7
DGS–3426:5#
show lldp ports
Purpose Display the LLDP per port configuration for advertisement options.
Syntax
show lldp ports {<portlist>}
Description This command is used to display the LLDP per port configuration for advertisement
options.
Parameters <portlist> – Use this parameter to define ports to be configured.
Restrictions None.
Example usage:
To display the LLDP per port TLV option configuration:
DGS-3426:5#show lldp ports 1
Command: show lldp ports 1:1
Port ID : 1:1
-----------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Disabled
Advertised TLVs Option :
Port Description Disabled
System Name Disabled
System Description Disabled
System Capabilities Disabled
Enabled Management Address
(None)
Port VLAN ID Disabled
Enabled Port_and_Protocol_VLAN_ID
(None)
