xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
46
create snmp group
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DGS–3426:5#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1
notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1
notify_view v1
Success.
DGS–3426:5#
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax delete snmp group <groupname 32>
Description
This command is used to remove an SNMP group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that will identify the
SNMP group the new SNMP user will be associated with.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DGS–3426:5#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS–3426:5#
show snmp groups
Purpose Used to display the group–names of SNMP groups currently configured on the Switch.
The security model, level, and status of each group are also displayed.
Syntax
show snmp groups
Description This command displays the group–names of SNMP groups currently configured on the
Switch. The security model, level, and status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS–3426:5#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : initial
ReadView Name : restricted
WriteView Name :
