xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
175
enable mld_snooping
Purpose Used to enable MLD snooping globally on the switch.
Syntax
enable mld_snooping {forward_mcrouter_only}
Description This command, in conjunction with the disable mld_snooping will enable and disable
MLD snooping globally on the Switch without affecting configurations.
Parameters forward_mcrouter_only – Specifies that the Switch should only forward all multicast traffic
to a multicast–enabled router. Otherwise, the Switch will forward all multicast traffic to any
IP router.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable MLD snooping globally on the Switch:
DGS–3426:5#enable mld_snooping
Command: enable mld_snooping
Success.
DGS–3426:5#
disable mld_snooping
Purpose Used to disable MLD snooping globally on the switch.
Syntax
disable mld_snooping {forward_mcrouter_only}
Description This command, in conjunction with the enable mld_snooping will enable and disable
MLD snooping globally on the switch without affecting configurations.
Parameters forward_mcrouter_only – Specify to disable the Switch from forwarding all multicast traffic
to a multicast–enabled router. Otherwise, the Switch will forward all multicast traffic to any
IP router.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable MLD snooping globally on the Switch:
DGS–3426:5#disable mld_snooping
Command: disable mld_snooping
Success.
DGS–3426:5#
