xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
267
DGS–3426:5#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DGS–3426:5#
delete authen_login method_list_name
Purpose Used to delete a previously configured user defined method list of authentication methods
for users logging on to the Switch.
Syntax
delete authen_login method_list_name <string 15>
Description This command is used to delete a list for authentication methods for user login.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to define the given
method list to delete.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the method list name “Tiberius”:
DGS–3426:5#delete authen_login method_list_name Tiberius
Command: delete authen_login method_list_name Tiberius
Success.
DGS–3426:5#
show authen_login
Purpose Used to display a previously configured user defined method list of authentication
methods for users logging on to the Switch.
Syntax
show authen_login [default | method_list_name <string 15> | all]
Description This command is used to show a list of authentication methods for user login.
Parameters default – Entering this parameter will display the default method list for users logging on
to the Switch.
method_list_name <string 15> – Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per method
list name.
Comment – Defines the type of Method. User–defined Group refers to server
group defined by the user. Built–in Group refers to the TACACS, XTACACS,
TACACS+ and RADIUS security protocols which are permanently set in the
Switch. Keyword refers to authentication using a technique INSTEAD of
TACACS / XTACACS / TACACS+ / RADIUS which are local (authentication
through the user account on the Switch) and none (no authentication necessary
to access any function on the Switch).
Restrictions Only Administrator-level users can issue this command.
