xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
42
show snmp view
Purpose Used to display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 32>}
Description This command is used to display an SNMP view previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the
SNMP view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
UserName:
PassWord:
DGS–3426P:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
–––––––––––––––––––– ––––––––––––––––––––––– ––––––––––
v3v 1 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 9
DGS–3426P:4#
