xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
278
delete authen server_group
Purpose Used to delete a user–defined authentication server group.
Syntax
delete authen server_group <string 15>
Description This command is used to delete an authentication server group.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be deleted.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the server group “group_1”:
DGS–3426:5#delete server_group group_1
Command: delete server_group group_1
Success.
DGS–3426:5#
show authen server_group
Purpose Used to view authentication server groups on the Switch.
Syntax
show authen server_group <string 15>
Description This command is used to display authentication server groups currently configured on the
Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on the Switch, including
built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be viewed.
Entering this command without the <string> parameter will display all authentication
server groups on the Switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To view authentication server groups currently set on the Switch.
DGS–3426:5#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
–––––––––––– ––––––––––––––– ––––––––
ctsnow 10.53.13.2 TACACS
tacacs 10.53.13.94 TACACS
tacacs+ (This group has no entry)
–––––––––––– (This group has no entry)
Total Entries : 4
DGS–3426:5#
