xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
272
config authen application
Purpose Used to configure various applications on the Switch for authentication using a previously
configured method list.
Syntax
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
Description This command is used to configure Switch configuration applications (console, Telnet,
SSH, Web) for login at the user level and at the administration level (authen_enable)
utilizing a previously configured method list.
Parameters application – Choose the application to configure. The user may choose one of the
following five options to configure.
console – Choose this parameter to configure the command line interface login
method.
telnet – Choose this parameter to configure the telnet login method.
ssh – Choose this parameter to configure the Secure Shell login method.
http – Choose this parameter to configure the web interface login method.
all – Choose this parameter to configure all applications (console, Telnet, SSH,
web) login method.
login – Use this parameter to configure an application for normal login on the user level,
using a previously configured method list.
enable – Use this parameter to configure an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default – Use this parameter to configure an application for user authentication using the
default method list.
method_list_name <string 15> – Use this parameter to configure an application for user
authentication using a previously configured method list. Enter an alphanumeric string of
up to 15 characters to define a previously configured method list.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the default method list for the web interface:
DGS–3426:5#config authen application http login default
Command: config authen application http login default
Success.
DGS–3426:5#
show authen application
Purpose Used to display authentication methods for the various applications on the Switch.
Syntax
show authen application
Description This command will display all of the authentication method lists (login, enable
administrator privileges) for Switch configuration applications (console, Telnet, SSH, web)
currently configured on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the login and enable method list for all applications on the Switch:
