xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
389
Example usage:
To configure the sFlow server:
DGS-3426:5#config sflow analyzer_server 1 collectoraddress 10.90.90.9
Command: config sflow analyzer_server 1 collectoraddress 10.90.90.9
Success.
DGS-3426:5#
delete sflow analyzer_server
Purpose Used to delete an sFlow analyzer server set on the switch.
Syntax
delete sflow analyzer_server <value 1-4>
Description This command is used to delete a previously created sFlow analyzer server.
Parameters
<value 1-4> − Enter the value identifying the analyzer to be deleted here.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete an sFlow analyzer server:
DGS-3426:5#delete sflow analyzer_server 1
Command: delete sflow analyzer_server 1
Success.
DGS-3426:5#
show sflow analyzer_server
Purpose Used to display the settings of the sFlow analyzer server set on the switch.
Syntax
show sflow analyzer_server
Description This command is used to display the settings for a previously created sFlow analyzer
server.
Parameters None.
Restrictions None.
Example usage:
To display the sFlow analyzer server settings:
DGS-3426:5#show sflow analyzer_server
Command: show sflow analyzer_server
SFlow Analyzer Server Information
----------------------------------------------------
Server ID :1
Owner : ctsnow
Timeout : 2000
Current Countdown Time : 2000
Collector Address : 10.1.2.23
Collector Port : 6343
Max Datagram Size : 1400
Total Entries : 1
