xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
378
DGS–3426:5#config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DGS–3426:5#
config lldp dot1_tlv_pvid
Purpose Used to configure an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally port VLAN ID TLV data types from outbound LLDP
advertisements.
Syntax
config lldp ports [<portlist> | all] dot1_tlv_pvid [enable | disable]
Description This TLV optional data type determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP transmission capable port.
Parameters <portlist> – Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_pvid – This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN ID TLV transmission is allowed on a given LLDP
transmission capable port. The default state is disabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure exclude the VLAN nameTLV from the outbound LLDP advertisements for all ports:
DGS–3426:5#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DGS–3426:5#
config lldp dot1_tlv_protocol_vid
Purpose Used to configure an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally port and protocol VLAN ID TLV data types from outbound LLDP
advertisements.
Syntax
config lldp ports [<portlist> | all] dot1_tlv_protocol_vid [vlan [all | <vlan_name 32> ]
| vlanid <vlanid_list> ] [enable | disable]
Description This TLV optional data type indicates whether the corresponding Local System’s port and
protocol VLAN ID instance will be transmitted on the port. If a port is associated with
multiple protocol VLANs, those enabled port and protocol VLAN IDs will be advertised.
Parameters <portlist> – Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_protocol_vid – This TLV optional data type determines whether the IEEE 802.1
organizationally defined port and protocol VLAN ID TLV transmission is allowed on a
given LLDP transmission capable port. The default state is disabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for all ports:
