xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
332
DGS–3426:5# clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS–3426:5#
show jwac
Purpose Used to display the JWAC configurations.
Syntax
show jwac
Description This command is used to show all the configurations of JWAC.
Parameters None.
Restrictions None.
Example usage:
To display the JWAC configuration:
DGS–3426:5# show jwac
Command: show jwac
State : Enabled
Enabled Ports : 1:1,1:11,1:23,1:25,1:35
Virtual IP : 1.1.1.1
Switch HTTP Port : 21212 (HTTP)
UDP Filtering : Enabled
Forcible Logout : Enabled
Redirect State : Enabled
Redirect Delay Time : 3 Seconds
Redirect Destination : Quarantine Server
Quarantine Server : http://172.18.212.147/pcinventory
Q–Server Monitor : Enabled (Running)
Q–Svr Error Timeout : 5 Seconds
Radius Auth–Protocol : PAP
Authentication Failover : Enabled
RADIUS Authorization : Disabled
Local Authorization : Disabled
DGS–3426:5#
