xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
204
DGS–3426:5#config 802.1x guest_vlan ports 1:1–1:5 state enable
Command: config 802.1x guest_vlan ports 1:1–1:5 state enable
Warning! The ports are moved to Guest VLAN!
Success.
DGS–3426:5#
show 802.1x guest_vlan
Purpose Used to view the configurations for a 802.1X Guest VLAN.
Syntax
show 802.1x guest_vlan
Description This command is used to display the settings for the VLAN that has been enabled as an
802.1X Guest VLAN. Guest 802.1X VLAN clients are those who have not been
authorized for 802.1X or they haven’t yet installed the necessary 802.1X software, yet
would still like limited access rights on the Switch.
Parameters None.
Restrictions None.
Example usage:
To configure the configurations for a previously created 802.1X Guest VLAN.
DGS–3426:5#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Guest VLAN : Tiberius
Enable guest VLAN ports: 1:5–1:8
DGS–3426:5#
delete 802.1x guest_vlan
Purpose Used to delete a 802.1X Guest VLAN.
Syntax
delete 802.1x guest_vlan {<vlan_name 32>}
Description This command is used to delete an 802.1X Guest VLAN. Guest 802.1X VLAN clients are
those who have not been authorized for 802.1X or they haven’t yet installed the
necessary 802.1X software, yet would still like limited access rights on the Switch.
Parameters <vlan_name 32> – Enter the VLAN name of the Guest 802.1X VLAN to be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a previously created 802.1X Guest VLAN.
DGS–3426:5#delete 802.1x guest_vlan Tiberius
Command: delete 802.1x guest_vlan Tiberius
Success.
DGS–3426:5#
