xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
41
create snmp view
Purpose Used to assign views to community strings to limit which MIB objects and SNMP manager
can access.
Syntax create snmp view <view_name 32> <oid> view_type [included | excluded]
Description This command is used to assign views to community strings to limit which MIB objects an
SNMP manager can access.
Parameters <view_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will be included or
excluded from access by an SNMP manager.
view type – Sets the view type to be:
• included − Include this object in the list of objects that an SNMP manager can
access.
• excluded − Exclude this object from the list of objects that an SNMP manager
can access.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create an SNMP view:
DGS–3426:5#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS–3426:5#
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the Switch.
Syntax
delete snmp view <view_name 32> [all | <oid>]
Description This command is used to remove an SNMP view previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the
SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will be deleted from the
Switch.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS–3426:5#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS–3426:5#
