A SERVICE OF

logo

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
187
DGS–3426:5#disable 802.1x
Command: disable 802.1x
Success.
DGS–3426:5#
show 802.1x
Purpose Used to display the 802.1X general configurations on the Switch.
Syntax
show 802.1x
Description This command is used to display the 802.1X general configurations on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the 802.1X general authentication configuration:
DGS–3426:5# show 802.1x
Command: show 802.1x
802.1X : Enabled
Authentication Mode : Port_based
Authentication Protocol : RADIUS_EAP
Authentication Failover : Enabled
Forward EAPOL PDU : Enabled
Max Users : No Limit
RADIUS Authorization : Enabled
DGS–3426:5#