xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
323
disable jwac quarantine_server_monitor
Purpose Used to disable the JWAC quarantine server monitor.
Syntax
disable jwac quarantine_server_monitor function
Description This command is used to disable the JWAC quarantine server monitor.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the JWAC quarantine server monitor:
DGS–3426:5# disable jwac quarantine_server_monitor
Command: disable jwac quarantine_server_monitor
Success.
DGS–3426:5#
config jwac quarantine_server_error_timeout
Purpose Used to set quarantine server error timeout.
Syntax
config jwac quarantine_server_error_timeout <sec 5–300>
Description When the quarantine server error timeout is enabled, the Switch will periodically check if
the server is functioning properly. If the Switch does not receive any responses from the
quarantine server during the configured error timeout interval, the Switch then regards it
as not working properly.
Parameters <sec 5–300> – To specify the error timeout interval
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the JWAC quarantine server error timeout:
DGS–3426:5#config jwac quarantine_server_error_timeout 60
Command: config jwac quarantine_server_error_timeout 60
Success.
DGS–3426:5#
