xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
356
To enable MAC-based access control:
DGS–3426:5# enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DGS–3426:5#
disable mac_based_access_control
Purpose Used to disable MAC-based access control.
Syntax
disable mac_based_access_control
Description This command is used to disable the MAC-based access control function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable MAC-based access control:
DGS–3426:5#disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DGS–3426:5#
config mac_based_access_control password
Purpose Used to configure the MAC-based access control password.
Syntax
config mac_based_access_control password <passwd 16>
Description This command is used to set a password that will be used for authentication via a
RADIUS server.
Parameters <passwd 16> – In RADIUS mode, the Switch communicates with a RADIUS server using
the password. The maximum length of the key is 16.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the MAC-based access control password:
DGS–3426:5# config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
DGS–3426:5#
