Filter
Top Products
YOUR PHONE
CUSTOMIZING PHONE SETTINGS
80
4
CHAPTER
6 Enter your PIN2 and press Done (left
softkey). If your SIM card is locked,
enter your PUK2 and press Done (left
softkey).
7 Press Menu (right softkey) to add,
delete, or edit the phone numbers in the
list.
8 Press OK .
Manually selecting your wireless band
IMPORTANT The wireless band setting is
preset for optimum performance. Do not
change this setting unless instructed to do
so by a representative from your wireless
service provider.
1 Press Start and select Settings.
2 On the Personal tab, select Phone .
3 Select the Band tab.
4 Select the Select your network type
list, and then select one of the
following:
Auto: Automatically selects a network.
GSM: Connects only to GSM networks.
UMTS: Connects only to UMTS (3G or
HSDPA) networks.
5 Select the Select your GSM/UMTS
Band list, and then select either Auto or
one of the bands listed. The band
options differ depending on your
wireless service provider.
6 Press OK .
TIP
If your wireless service provider changes
the PIN2 code, you need to change it on your
smartphone. Press Start and select Settings.
On the Personal tab, select Phone. Select the
PIN2 tab, and then select Change PIN2.