Endpoint Menu, Views, and Lists Endpoint Operations
Polycom, Inc. 93
Actions in the Peripheral View
Besides providing access to the peripherals, the Actions section of the
Peripheral View may also include these context-sensitive commands
depending on the selected peripheral type and its status.
Status The state of the peripheral. Possible values include:
• Connected - Peripheral is connected to the
endpoint.
• Disconnected - Peripheral is turned off or no longer
connected to the endpoint.
• Error - Endpoint reports an error with the
peripheral.
• Blank - Endpoint is not reporting that the peripheral is
connected.
Paired HDX Name of the endpoint to which the peripheral is
connected or Not Paired. The Not Paired designation
means the peripheral was connected to an endpoint, but it
is not connected to one now.
Type The type of peripheral.
Serial Number The serial number of the peripheral.
IP Address The IP address assigned to the peripheral, if applicable.
Area (Available only when Areas are enabled.) The area with
which peripheral is associated. The peripheral inherits its
area from the endpoint to which the peripheral is
connected.
Users can only view area information for the areas to
which they belong or have been assigned to manage.
Hardware Version The hardware version of the peripheral.
Software Version The software version of the peripheral.
Field Description
Action Use this action to...
Delete Peripheral (Available only when the peripheral is no longer paired
with an endpoint.) Delete the peripheral from the
Peripheral View list.
Display
Applications
(Available only for peripherals on which you can install
multiple applications.) Display a list of installed
applications and their version.
