Web Scheduler’s Guide
60 Polycom, Inc.
Bit Rate
(continued)
When the dial speed is higher than the number of
channels defined in the H.320 service for the
endpoint, you receive a warning. To continue, lower
the dial speed to less than or equal to the ISDN
capability of the endpoint.
Higher speed is important for high-quality video in a
conference. Because higher speeds use greater
bandwidth, scheduling a high-bandwidth conference
may limit the number of conferences that you can
reserve at one time.
People + Content Controls the ability for one endpoint to send two types
of data—a data stream and a video stream—over the
same bandwidth to display people and content. The
receiving endpoint handles the two video streams
differently and may display them on separate screens
or through video switching mode.
Endpoints that do not support the selected method
connect with either video through IP or audio only
through ISDN.
Select from these available settings:
•None. Select this option when dual data streams
are not required.
• People +Content (H.329). This enables the
industry standard H.239 dual streams for endpoints
that support H.239 or the Polycom proprietary
People+Content dual streams for older Polycom
endpoints without H.239 capabilities. The MCU
requires that conferences with People + Content
use a minimum speed of 192 K.
• People and Content VO. This Polycom proprietary
technology works with PictureTel endpoints. Select
this option for older endpoints.
•Duo Video. This setting supports IP and ISDN and
is available with TANDBERG endpoints, in which
one part of the conference is set as the video
conference and the other as the presentation
conference.
Setting Description
