Endpoint Fields for Scheduled Provisioning Using Scheduled Provisioning Profiles
Polycom, Inc. 165
You can perform these operations on multiple endpoints at the same time. To
select multiple endpoints, hold the control key while you select the endpoints.
For information about these endpoint actions, see “Using Scheduled
Provisioning Profiles” on page 157.
Endpoint Fields for Scheduled Provisioning
The following table shows the fields you can configure when adding a new
scheduled provisioning profile. You may find more implementation details
about these fields in the endpoint system documentation.
To view or created scheduled provisioning profiles, select Admin >
Provisioning Profiles > Scheduled Profiles.
.
Action Use this action to...
Provision Schedule provisioning for the selected endpoint(s).
Cancel Provision Cancel a previously scheduled provisioning operation.
Clear Status Change the status column for a endpoint to the Clear
state.
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
General Settings > System Settings > System Settings 1
Maximum Time in Call
(minutes)
Specifies the maximum number of minutes allowed for
a call. Enter 0 to remove any limit.
YYY
Allow Mixed IP and
ISDN calls
Specifies whether users can make multipoint calls that
include both IP and H.320 sites.
YY—
Auto Answer
Point-to-Point Calls
Specifies whether to set the endpoint system to answer
incoming point-to-point calls automatically.
YYY
Auto Answer
Multipoint Calls
Specifies whether to set the endpoint system to answer
incoming multipoint calls automatically.
YY—
Allow Directory
Changes
Specifies whether users can save changes to the
directory or contacts/favorites list.
YYY
