Basic Conference Scheduling
Polycom, Inc. 49
— If the guest has an H.323 (IP) endpoint, configure these settings:
— If the guest has a SIP (IP) endpoint, configure these settings:
How will the
participant
join the
conference
Specify how the participant will join the conference.
•In Person —The participant will attend the conference
by going to a room that is included in the conference or
joining another participant who is attending the
conference.
• Audio Only —The participant will attend the conference
by telephone. The system will either call out to the
participant or the participant will dial in.
•Use Video—The participant will attend the conference
using a video endpoint system. The system will either
call out to the participant or the participant will dial in.
This selection will in part determine what other fields of the
Add Guest dialog box you will need to complete.
Bit Rate (Video only) Set as required. You can change the
connection speed for an endpoint up to the maximum
speed specified by the conference template.
Dial Options Specify whether the guest will dial into the conference or
require that the system dial out to the guest.
Dial Type Specify the protocol that the guest’s endpoint supports:
H.323 (IP), SIP (IP), or H.320 (ISDN).
This selection determines what other sections of the Add
New Guest dialog box you need to complete.
Field Description
Field Description
Extension Use this field to connect the conference to another
conference on another MCU. In this field, specify the
conference ID or passcode for the conference on
the other MCU.
MCU Service Choose from the list of MCU services defined on the
MCUs with which the RealPresence Resource
Manager system is registered. Leave this at Any
Available Service unless you have specific
knowledge of MCU services.
Field Description
SIP URI The SIP URI that the MCU must resolve to contact
the guest.
