Polycom RealPresence Resource Manager System Operations Guide Endpoint Fields for Scheduled Provisioning
180 Polycom, Inc.
Duplex Mode Specify the duplex mode to use. Note that the Duplex
mode you choose must be supported by the switch.
Choose Auto to have the network switch negotiate the
Duplex mode automatically. In this case, the switch
must also be set to Auto. Choosing Auto automatically
sets LAN Speed to Auto.
Changing this setting causes the system to restart.
YYY
Global Services > Directory Servers
Global Directory (GDS) Specifies the IP address or DNS address of the Global
Directory Server.
YYY
Password Lets you enter the global directory password, if there is
one.
YYY
Display Name in
Global Directory
Specifies whether to display the system’s name in the
global directories of other registered systems. Global
Address
YYY
Display Global
Addresses
Displays other registered systems in the global
directory.
YYY
Register Registers this system with the Global Directory Server. Y Y Y
Save Global Directory
to System
Copies the global directory to this local system. When
this setting is disabled, the system can display no more
than 1,000 global directory entries. When this setting is
enabled, the system can display up to 4,000 global
directory entries.
YYY
LAN/H.323 > Global Directory (GDS) > Preferences
Show Addresses in
Address Book
——
Preferred Speed for
Placing Calls (Kbps)
Determines the speeds that will be used for IP, ISDN, or
International ISDN calls from this endpoint system
when:
• The Call Quality selection is either unavailable or set
to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site endpoint system does not support the
selected speed, the endpoint system automatically
negotiates a lower speed.
——
ISDN Video Call
(H.320)
——
International ISDN
calls
——
IP Calls ——
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
