Polycom RealPresence Resource Manager System Operations Guide Endpoint Fields for Scheduled Provisioning
168 Polycom, Inc.
Enable FTP Access Specifies that the endpoint system can be accessed via
an FTP session.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
Y
Enable Web Access Specifies that the endpoint system can be accessed via
it’s web interface.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
YYY
Enable Telnet Access Specifies that the endpoint system can be accessed via
a telnet session.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
YYY
AES Encryption Specifies how to encrypt calls with other sites that
support AES encryption.
• Off—AES Encryption is disabled.
• When Available—AES Encryption is used with any
endpoint that supports it, even if the other endpoints
in the call don’t support it.
• Required for Video Calls Only—AES Encryption is
used for all video endpoints in the call. Analog
phone and voice over ISDN connections are
allowed. Video endpoints must support AES
Encryption to participate in the call.
• Required for All Calls—AES Encryption is used for all
video endpoints in the call. Analog phone and voice
over ISDN connections are not allowed. All
endpoints must support AES Encryption to
participate in the call.
YYY
Enable SNMP Access Specifies that the endpoint system can be accessed via
an SNMP monitoring system.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
