Endpoint Fields for Scheduled Provisioning Using Scheduled Provisioning Profiles
Polycom, Inc. 173
NAT is H.323
Compatible
Specifies that the endpoint systems are behind a NAT
that is capable of translating H.323 traffic.
YYY
Address Displayed in
Global Directory
Specifies whether or not to include the endpoint
system’s information in the global directory
YYY
Video Network > ISDN BRI Protocol
Enable ISDN H.320 Allows this system to make H.320 (ISDN) calls. Y Y
Number of ISDN
Channels to Dial in
Parallel
Specifies how many channels to dial at one time. You
can specify up to eight channels. If you experience
network problems, decrease the number.
Set this value to 1 for serial dialing. Serial dialing is not
recommended unless you have trouble connecting
calls using parallel dialing.
YY
ISDN Switch Protocols Specifies the protocol used by your network’s switch. Y Y
Outside Line Dialing
Prefix
Specifies the ISDN dialing prefix used to call outside
the network.
YY
Video Network > Preferred Speeds
Preferred Speed for
Placing Calls (Kbps)
Determines the speeds that will be used for IP, ISDN, or
International ISDN calls from this endpoint system
when:
• The Call Quality selection is either unavailable or set
to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site endpoint system does not support the
selected speed, the endpoint system automatically
negotiates a lower speed.
YYY
IP Calls YYY
ISDN Video Call
(H.320)
YY
International ISDN
calls
YY
Maximum Speed for
Receiving Calls (Kbps)
Allows you to restrict the bandwidth used when
receiving IP or ISDN calls.
If the far site attempts to call the system at a higher
speed than selected here, the call is re-negotiated at
the speed specified in this field.
YYY
IP Calls YYY
ISDN Video Call
(H.320)
YY
Monitors > Monitors 1
Number of Monitors Y
Monitor 1 Options
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
