Managing Sites Setting Up Site Topology
Polycom, Inc. 413
Add a Site
To add a site
1 Go to Admin > Topology > Sites or Admin > Topology > Site Topology.
2 In the Sites list or Site Topology page, click Add Site.
3 In the Add Site dialog box, enter a Site Name and Description for the
site.
4 Complete the General Info, Routing, Subnet, and if applicable ISDN
Number Assignment, sections of the Add Site dialog box. The minimum
information required is Site Name, Description, Location, and Subnets.
For information about all of the site fields, see “Add/Edit Site Dialog Box”
on page 402.
5 Click OK.
The new site is added to the system and the Edit Site Provisioning dialog
box appears. These are the site-based parameters that the system
dynamically provisions to endpoint systems operating in dynamic
management mode.
6 As needed, edit the default site provisioning details and click Apply.
Max Bit Rate (Kbps) The per-call bandwidth limit for audio and video
calls.
Territory The territory to which the site belongs, which
determines the Resource Manager system
responsible for it.
Area Available only when areas are enabled.
The area to which the site is assigned.
A user can only view area-specific information for
an area(s) that he has permission to manage.
Column Description
Note
Not all of the site provisioning parameters apply to all endpoint systems being
provisioned. If an endpoint system does not have a corresponding parameter, it
ignores the parameter.
